Products

391 products

£2.99 each

£2.99

A sprung hinge with a low profile arm for use on built-in fridge/freezer units or similar integrated appliances with side-hinged doors. This should be used with 0mm Steel High Mount Plates which ...

Salice Futura Extension Spacer Blocks - A610.500

£2.25 per pair

£2.25

A pair of grey plastic rear extension spacer clips. These reduce the effective runner length by 50mm allowing a near 'full extension' effect for a fraction of the cost of a triple part full exte...

Salice Futura Push Synchronizer for Full Extension Runners

£12.49 per set

£12.49

Please note that this synchroniser bar will only work with Salice drawer runners marked 65577 or that have a tab on the runner to receive the synchroniser. The synchronisation system for Push-open ...

Salice Futura Standard Concealed Drawer Runners - A615 Series

from £14.90 per pair

from £14.90

Salice FUTURA A615 CONCEALED DRAWER RUNNERS (Partial Extension) A bottom mounted concealed drawer runner. Load capacity 35 Kilos Requires 3.5 x 16mm flat head screws for instalation Fixing clips...

from £0.95 each

from £0.95

Circular shaped cover caps provide a clean, elegant finish to your glass doors, hiding away the hinge mechanism. Injection moulded plastic with plated or painted effect metallic finishes. Diameter...

Salice Hinge Flange Cover Cap for Standard Angle Hinges

from £0.40 each

from £0.40

Screw cover cap for the hinge flange. This will only suit Series 100, 200, 700, 800 and 900 standard angle hinges, for wide angle hinges, please order this part here. Please note that it will not s...

Salice Hinge Restrictor S2A637XF - Pack of 10

£3.65 Per pack of 10

£3.65

This Salice S2A637XF stop device restricts the opening of the door to 86 degrees. Sold in a pack of 10.

Salice Inline Diecast Clip-On Mount Plate BAP3R

from £0.89 each

from £0.89

A diecast straight 'DOMI' Mount Plate for use with standard wood screws (3.5 x 16mm), finished in Nickel. Front screw hole to be drilled 21mm from edge of carcase. Heights: 0mm 6mm Typically...

Salice Lapis Arm Cover 9mm Metal Black - P7A9A10

£4.49 per cover

£4.49

Lapis hinge cover for the arm side of the hinge, to suit a 9mm crank hinge. Metal Black finish.

Salice Lapis Arm Cover Satin Gold - P7A0A1W

£3.49 per cover

£3.49

Lapis hinge cover for the arm side of the hinge. Satin Gold finish.

Salice Lapis Cup Cover Satin Gold - P7SXA1WSN

£1.99 per cover

£1.99

Lapis hinge cover for the cup side of the hinge. Satin Gold finish.

Salice Magnetic Push to Open Adjustable Housing - DP82SNGR

£1.29 each

£1.29

A fully adjustable grey plastic housing for DPM Series PUSH magnetic catches. Requires 3.0mm countersunk woodscrews for fixing (not supplied) A seperate metal trim cap S2BX83H9 is required.

Salice Magnetic Push to Open Basic Housing - DP80SNGR

£0.79 each

£0.79

A basic non-adjustable housing for DPM series of magnetic PUSH catches. Requires 3.5mm countersunk screws (not supplied).

Salice Metal Housing for Smove Buffer - D076SN9

£1.79 each

£1.79

A diecast housing for SMOVE system soft-close buffers. Front lip for carcase edge location. 10mm dia bore allows buffer to be firmly held in place by push-fit intallation. Drilled for 3.5 x 16mm...

Salice Metal Screw Cover for Hinges and Housings

from £0.20 each

from £0.20

A press-on decorative trim cap for SALICE hinge arms and some cupboard catch housings. This will fit the arms on wide angle hinges. Available in two finishes: Nickel - S2BX83H9 Titanium - S2BX8...

Video

Select a page.

Products

Shopping Cart

You might like these ...

Alexander and Wilks Handle Adapter

Alexander and Wilks Wade Round Cupboard Knob

Alexander and Wilks Brunel Knurled T-Bar Cupboard Pull Handle

Popular Products