Salice Pin Wine Information labels for use with the Salice Wine Pins.
An information label, onto which wine description and characteristics can be inscribed. The label perfectly integrates with the...
The highly flexible and innovative combination of the Pin Wine brackets creates “made-to-measure” arrangements, using both standard, small and even “magnum” bottles.Pin Wine is also equipped with ...
A 3 metre length of plastic gasket designed for use with the Salice Air Aluminium Door profile.
The gasket is used when you need to use a 4mm thick piece of glass with the system, rather than the s...
A deep plastic spacer for the SMOVE Soft Close housings for IN-FRAME sytle kitchen cupboards.
Raises the housing by 21mm from carcase face.
Pre-mounted euro screws included (for 5mm dia pre-drlll...
A pressed steel mounting plate with pre-mounted 5mm euro fixing screws.
Available in 0mm and 3mm heights.
Features one cam of adjustment (forwards and backwards)
This mount plate will suit all Sali...
The basic pressed steel clip-on Mount Plate of the DOMI snap-on system.
Hight adjustment is by elongated screw holes, requiring the fixing screws to be slackened off and then retightened.
These p...
This budget pressed steel Mount Plate range does not offer any vertical adjustment to the hinge other than the eliptic fixing slot. Pre-mounted EURO fixing screws for pre-drilled 5mm diameter holes...
This budget pressed steel Mount Plate range does not offer any vertical adjustment to the hinge
other than the eliptic fixing slot.
Suitable for hinge ranges 200, 400, 700, 900, F & M.
Requir...
These pistons have now been discontinued, only the strengths shown below are left in stock.
New lift mechanisms powered by coil springs can be found here.
PROGRESSIVE action gas lift pistons. ...
A fully adjustable grey plastic PUSH release catch. Makes setting doors up for perfect opening and closing action much easier.
Designed to work in conjunction with Salice PUSH hinges only!
Do...
A basic grey plastic non-adjustable PUSH release catch.
Designed to work in conjunction with Salice PUSH hinges only!
Double handed - can be fitted left or right.
Screw fixings supplied c/...
The Salice Push to Open Magnetic Release Device Catch is to be used in conjunction with Push-to-Open hinges. All push to open doors using the magnetic system need one of these to hold the door and ...
This is a supplementary magnetic Push release catch for tall doors (1500mm tall or greater) to increase the magnetic holding strength. This cannot be used on its own, it be used in conjunction with...
