A 40mm cup hinge for heavier or thicker doors. 11mm cranked arm for HALF overlay applications.
Cup drilling depth is 13mm
Works with all traditional 200 Series mounting plates and all DOMI sn...
A 40mm cup hinge for heavier or thicker doors. 22mm cranked arm for INSET applications.
Cup drilling depth is 13mm
Works with all traditional 200 Series mounting plates and all DOMI snap-on mount...
A sprung cabinet hinge for doors with a positive 45 degree angle.
11mm deep metal cup.
94 degree opening, where theinside edge of the door meets the inside edge of the carcase.
Compatible ...
A 26mm cup MINI sprung hinge compatible with all 200, 700 and DOMI hinge mounting plates for 45 degree postive angled applications.
MINI hinges are typically used on bathroom cabinets and similar ...
A sprung cabinet hinge for doors with a positive 45 degree angle.
11mm deep metal cup.
94 degree opening, where the door overlays the carcase
Mounting Plates are NOT included and must be ordered...
A bottom mounted concealed drawer runner incorporating the SALICE SMOVE brake (see below). Load capacity 35 Kilos. Requires 3.5 x 16mm flat head screws for instalation
Fixing clips must be ordere...
The opening system for handle-less drawers.
A slight pressure of the central drawer front is all that is required for the drawer to self open
A bottom mounted concealed drawer runner
Load capacity ...
Salice Full Soft Close full extension drawer runners. As they are a concealed fit you cannot see these runners once fitted.
Maximum weight allowed per pair is 35kg. These runners are sold in pairs....
The Salice Shelf runner for pull-out shelves can be used in various applications for media units, office furniture and much more.
*** Please make sure to order fixing clips with these runners. We r...
Salice Full Push-To-Open full extension drawer runners. As they are a concealed fit you cannot see these runners once fitted.
Maximum weight allowed per pair is 35kg. These runners are sold in pair...
The Salice Shelf runner for pull-out shelves can be used in various applications for media units, office furniture and much more.
*** Please make sure to order fixing clips with these runners. We r...
A sprung corner cabinet hinge for door to door corner installation with a positive 90 degree angle.
11mm deep die cast cup, 35mm diameter.
45mm Screw Centres
70 degree opening.
Compatible wi...
A sprung corner cabinet hinge for door to door corner installation with a positive 90 degree angle.
11mm deep die cast cup, 35mm diameter.
70 degree opening.
Compatible with all series 200...
Sprung crampon hinge for cabinet sides with 37 x 32mm standard drilling.
11mm deep metal cup.
Please see the additional photos for mount plate information. For most applications a 3mm high mount ...
Description
This Series 200 hinge is designed to be used on glass doors with a thickness of 4-6mm.
26mm Cup Diameter
94 Degree Opening
0mm Crank
Designed for full overlay doors
The possible dri...
